薄壁圓通風管制作質量的驗收，按設計圖紙與本規范的規定執行。山東通風管道加工工程中所選用的外購薄壁圓通風管，還必須提供相應的產品合格證明文件或進行強度和嚴密性的驗證，符合要求的方可使用。

　　The acceptance of the quality of the thin-wall flexible air duct is carried out according to the design drawings and this specification. The purchased thin walled flexible wind pipe in the project must also provide the relevant product qualification documents or the verification of the strength and tightness, which can be used in accordance with the requirements.

　　1、適用于建筑工程通風與空調工程中，使用的金屬、非金屬薄壁圓通風管與復合材料薄壁圓通風管或風道的加工、制作質量的檢驗與驗收。

　　1. It is suitable for the inspection and acceptance of the processing and making quality of metal and nonmetal thin-wall wind pipes and composite thin-wall wind pipes or air ducts used in ventilation and air conditioning works of construction projects.

　　2、薄壁圓通風管的密封應以板材連接的密封為主，可采用密封膠嵌縫和其他方法密封。密封膠性能應符合使用環境的要求，密封面宜設在薄壁圓通風管的正壓側。

　　2, thin wall sealed air pipe should be flexible plate connection seal, the sealing sealant and other methods. Sealant performance should comply with the requirements of the use of the environment, the sealing surface should be located in the thin-walled pressurized air duct on the positive side.

　　3、對薄壁圓通風管制作質量的驗收，應按其材料、系統類別和使用場所的不同分別進行，主要包括薄壁圓通風管的材質、規格、強度、嚴密性與成品外觀質量等項內容。

　　3, the thin air pipe production quality acceptance tact, should be carried out respectively according to their materials and Systems category and the use of the different places, mainly including thin walled tube material, flexible wind specifications, strength, tightness and product quality etc..

　　4、鍍鋅鋼板及各類含有復合保護層的鋼板，應采用咬口連接或鉚接，不得采用影響其保護層防腐性能的焊接連接方法。

　　4 、 galvanized steel sheet and all kinds of steel plate with compound protective layer shall be made of bite joint or riveted joint, and the welding connection method that does not affect the anticorrosion performance of protective layer shall be adopted.

　　5、 薄壁圓通風管道內外壁光滑，風道阻力小，送排風時不產生二次噪聲，降低能耗，節約運行費用。

　　5, thin flexible wind pipe, internal and external wall smooth, air duct resistance is small, send and exhaust air does not produce two times noise, reduce energy consumption, save operation cost.

　　6、薄壁圓通風管的密封，應以板材連接的密封為主，可采用密封膠嵌縫和其他方法密封。密封膠性能應符合使用環境的要求，密封面宜設在薄壁圓通風管的正壓側。

　　Seal 6, thin tact duct, should be connected with plate sealing, the sealing sealant and other methods. Sealant performance should comply with the requirements of the use of the environment, the sealing surface should be located in the thin-walled pressurized air duct on the positive side.

　　本文的精彩內容來自山東通風管道加工詳細內容請點擊我們的網站:http://m.heblc.com/謝謝您的到來!

　　The highlights of this article are from the Shandong ventilation pipe processing details, please click on our official website: http://m.heblc.com/, thank you for coming!

上一篇：螺旋式風管單元強度大于通俗風管
下一篇：新風機組是和風機盤管配合使用的特點